CM Wall Putty
CM Wall Putty
CM Wall Putty is completely cement based putty which is white in color. It’s use is better for the exterior as well as interior walls of buildings. The white colored cement-based putty binds very strongly with base plaster in such conditions as well when the surface is damp and it forms a good and protective base. The pores (fine one) on ceiling and walls can be easily fills up and gives you a fine even and very smooth and dry surface which is best for painting. CM Wall Putty gives an effective protection against flaking; so it assures you good even, looking smooth walls of your home for so many years.
Benefits
Smooth Finish
Water Resistant
Excellent Strength
Good Workability
Intercoat Adhesion
Water Vapour Permeability
Features
- Your plastered walls may feature uneven surfaces. Applying 2 thick coats of Putty will even out these surfaces and provide your painted walls a smooth, final finish.
- Wall care putty combines with plaster to make a stronger bond with paint and makes it longer lasting and durable.
- Because it has water-resistant properties, putty will save your paint from dampness as well as the resultant discolored patches for a long time.
- It prevents flaking of expensive coats of paints
- Putty is eco-friendly.
- It doesn’t need curing
- It brings out the true tone or shade of the paint
- Provides your walls a smooth, silky finish
- The products can be used for both exterior and interior walls.
Directions for Use
- Application can easily applied on plastered surface.
- It gives fine finish and it is very useful for Inner and Outer walls.
- Before applying wall putty makes sure that the surface is free from dust or not, if not make it dust free. Also make sure that it is free from any type of fungus, greases, bitumen, and any kind of release agents, moss, paints, oils, loose particles or any kind of coating. Make sure that the surface should be free from all the above mentioned impurities otherwise it affects the workability of wall putty.
- Before applying make sure that the surface where the putty is supposed to be applied should be pre-wetted.
This will helps you to provide a very strong bond with the substrate. - Its better to apply at least two coats of CM Wall Putty on plastered surface of wall (Each coat should be Max 1.5 mm of total thickness).
- The CM Wall Putty covers almost more surface area that is exceeding to 9-10 Sq. ft. /kg. In two coats on new plastered wall.
Safety and Health
- Kindly refer to the MSDS for Chetak Gold Paints CM Wall Putty which gives detailed information on safety measures while handling the paint.
- Keep out of reach of children and away from food, drink May be harmful if swallowed. In case of ingestion seek immediate medical attention.
- Wear eye protection during application. In case of contact with eyes, rinse immediately with plenty of water and seek medical advice.
- In case of skin contact immediately wash skin with soap and plenty of water. Get medical attention if irritation develops or persists.
- It is recommended to wear suitable nose pad during sanding and surface preparation to avoid dust inhalation. Do not pour leftover paint down the drain or in water courses.